Progressing Cavity Pumps Market: Notable Developments & Geographical Outlook

 A progressing cavity pump employs the positive displacement principle. Progressing cavity pumps are often installed where a high discharge pressure is required while handling viscous fluids at high flow rates. Furthermore, dough, pulps, mashes and slurry from paper recycling plants, anaerobic digestion facilities and wastewater treatment plants are the typical fluids for which progressing cavity pumps are used. Initially, before the development of synthetic elastomers and adhesives, progressing cavity pumps (PCP) were used as fluid transfer pumps in a wide range of manufacturing and industrial applications. Also, progressing cavity pumps are considered an ideal choice to provide constant flow irrespective of liquid viscosity, which may vary.

Get | Download Sample Copy with Graphs & List of Figures:
https://www.futuremarketinsights.com/reports/sample/rep-gb-2900

Therefore, associated surface drive systems and downhole PC pumps are the two key features that differentiate from other forms of artificial lifts. Moreover, common situations such as elevated-temperature applications, water-source wells and hostile fluid conditions, among other applications are expected to enhance the progressing cavity pumps use.

Get | Download Sample Copy with Graphs & List of Figures:
https://www.futuremarketinsights.com/reports/sample/rep-gb-7112

Progressing cavity pumps require low maintenance, produce low surface noise levels and have low profile surface equipment to compete with substitutes and propel the demand over the forecast period. Progressing cavity pumps relatively have simple installation and operation along with relatively low power costs, which is expected to drive the global progressing cavity pumps market.

However, limited production rate and the lower lifting capacity of larger progressing cavity pumps are estimated to hamper the global progressing cavity pumps market over the forecast period. Further, the requirement of highly skilled labor to install and operate systems along with paraffin control issues in waxy crude application are further expected to hamper the market growth over the forecast period.

Regional Outlook

Europe, followed by Asia Pacific and North America, is estimated to hold a significant share in the global progressing cavity pumps market. Europe is projected to be a dominant consumer of progressive cavity pumps, owing to the extensive application across the oil and gas industry. Furthermore, Asia Pacific is estimated to exhibit significant growth during the forecast period, owing to the growth in wastewater, oil and gas activities. Moreover, the Middle East & Africa region is further expected to witness substantial growth during the forecast period. Latin America is expected to account for a small share in the global progressing cavity pumps market; however, during the forecast period, the region is estimated to witness substantial growth.

Regional analysis includes:

  • North America (U.S., Canada)
  • Latin America (Mexico. Brazil)
  • Western Europe (Germany, Italy, France, U.K, Spain)
  • Eastern Europe (Poland, Russia)
  • Asia Pacific (China, India, ASEAN, Australia & New Zealand)
  • Japan
  • Middle East and Africa (GCC Countries, S. Africa, Northern Africa)

The report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts and industry participants across the value chain. The report provides in-depth analysis of parent market trends, macro-economic indicators and governing factors along with market attractiveness as per segments. The report also maps the qualitative impact of various market factors on market segments and geographies.

For More Information or Query or Customization Before Buying, Visit:
https://www.futuremarketinsights.com/customization-available/rep-gb-7112

Progressing Cavity Pumps Market: Market Participants

Some of the market participants in the global progressing cavity pumps market include,

  • Verder Liquids BV
  • PCM
  • NETZSCH
  • NOV Process & Flow Technologies UK Limited
  • Liberty Process Equipment, Inc.
  • Colfax Americas
  • Roper Pump Company
  • Ritmac
  • Bornemann Exzenterschneckenpumpen GmbH
  • Apergy Artificial Lift

Key Data Points Covered in the Report

Some of the key data points covered in global Progressing Cavity Pumps market include:

  • An overview of the Progressing Cavity Pumps market, including background and evolution
  • Macroeconomic factors affecting the Progressing Cavity Pumps market and its potential
  • Global Progressing Cavity Pumps market dynamics, such as drivers, challenges and trends
  • Global Progressing Cavity Pumps market technology roadmap involved from inception period to present date
  • Detailed value chain analysis of the Progressing Cavity Pumps market
  • Cost structure of the products and segments covered in the global Progressing Cavity Pumps market
  • In-depth pricing analysis, by key product segments, regions and by major Progressing Cavity Pumps market participants
  • Analysis of supply and demand, such as top producing and consuming geographies, imports/exports and overall trade scenario in the global Progressing Cavity Pumps market
  • Analysis of the global Progressing Cavity Pumps market structure, including a tier-wise categorization of key Progressing Cavity Pumps for industrial facilities market participants

Competitive landscape of the Progressing Cavity Pumps market, including detailed profiles of top players in the Progressing Cavity Pumps market

The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to market segments such as geographies, application, and industry.

Request FREE PDF Brochure This Report:
https://www.futuremarketinsights.com/reports/brochure/rep-gb-7112

By Segment:

The global progressing cavity pumps market can be segmented on the basis of stage type, power rating, stator profile type and application.

On the basis of stage type, the global progressing cavity pumps market can be segmented into,

  • Single Stage
  • Double Stage
  • Four Stage
  • Eight Stage

On the basis of power rating, the global progressing cavity pumps market can be segmented into,

  • Up to 40 HP
  • 40 – 100 HP
  • 100 – 160 HP
  • Above 160 HP

On the basis of stator profile type, the global progressing cavity pumps market can be segmented into,

  • Conventional (single helix rotor inside double helix stator)
  • Stator (double helix rotor inside triple stator)
  • Standard (short pitch)
  • Long Geometry

On the basis of application, the global progressing cavity pumps market can be segmented into,

  • Oil & Gas
  • Waste & Wastewater
  • Chemical & Petrochemical
  • Food & Beverage
  • Mining

Comments

Post a Comment

Popular posts from this blog

Beer Keg System Market Current and Future Trends, Leading Players, Industry Segments and Regional Forecast By 2033 | Says FMI Analyst

  The global   beer keg system market   is anticipated to create staggering growth over the forecast period by registering a CAGR of 3.8%. The global market is projected to increase to US$1,630.9 Million in 2033 up from US$1,123.2 Million in 2023. According to Future Market Insights’ historical analysis, the global beer keg system market reached US$ 1,082.1 Million in 2022, up from US$ 886.8 Million in 2018. The global beer keg system is a long-standing tradition within the brewing industry, combined with several breweries which are still utilizing this method to serve their beer. In order to maintain the quality of the draught beer and craft beer, the need for a beer keg system will outpace the drawbacks, fueling the sales. The beer keg system is extensively utilized in the commercial sector for parties and is readily available on various online platforms. Moreover, a typical beer keg system combines a keg, a CO2 tank, and a tap. The keg is usually constructed of stainle...
Read more

Palletizing Robots Market – Latest Research, Industry Analysis, Driver, Trends, Business Overview, Key Value, Demand And Forecast

 Palletizing robots are a kind of equipment that help in the automatic compiling of various kinds of products on a pallet. The global  palletizing robots market  is slated to touch a value of about US$ 1,500 Mn in the year 2022 and display a robust CAGR during the assessment period. Pallet wrapping functions are an important part of the packaging line workflow before the product is transported and distributed to different locations. Because of advancements in the field of robotics, more advanced forms of palletizing robots have emerged, capable of lifting heavy weights and even products from greater heights due to their long arms. In addition, hybrid palletizing robots with a simple user interface and easy operation have been developed, in addition to being cost effective and efficient to use. Such hybrid palletizing robots are capable of performing complex tasks such as handling delicate products. Palletizing robots that can operate at high speeds and deliver high qu...
Read more

High Processing Equipment Market

 In its latest report, Future Market Insights (FMI) has identified few of the major trends governing the overall  market for  high pressure  processing equipment  (HPPE). In brief, rapid adoption of high pressure processing technique among premium juice manufacturers, automation and technological innovation and growing number of HPP tolling service providers are playing a major role in shaping the market trajectories currently. Hiperbaric S.A -- Most Successful Player in Recent Years According to the report, Hiperbaric S.A a prominent manufacturer of high pressure processing equipment is the current leader in the global market as the company’s hold over the North American region is substantially strong. FMI’s Insights on Growth Factors FMI indicates that the growing demand for processed, packaged and ready-to-eat food products worldwide is encouraging the use of high pressure processing equipment in food and beverage industry. Growing ...
Read more